Sunday, September 20
18:00-20:00	Early Registration
20:00-22:00	Welcome Drink
	Monday, September 21
	Room A				Room B				Room C
9:00-10:45	Opening Plenary Session Welcome by Authorities and Academic Representatives Invited Lecture (Odd Magnus Faltinsen, Milovan Peric) (Room A)
10:45-11:15	Coffee Break
11:15-13:00	Seakeeping and Maneuvring (1) Chair: O. M. Faltinsen				Ship Design (1) Chair: M. Ventura				Safety and Security (1) Chair: C. Guedes Soares
	#031	An experimental study on the added resistance of a bulk carrier model	D.E. Liarokapis, I.G. Tsami, J.P. Trahanas & G.D Tzabiras		#053	Global ship hull form description using single RBF	D. Ban & B. Ljubenkov		#058	Simulations performed on a bulk carrier in order to analyse the ship’s stability	D. Lamba, E. Barsan, C. Varsami & A. Arsenie
	#119	The effect of voluntary speed reduction criteria on attainable ship speed	J.  Prpic-Oršic, O.M. Faltinsen & J. Parunov		#067	Computational investigation of LNG storage tank for open type ferries	G. Theotokatos, G. A. Livanos, E. Strantzali, S. Dimitrellou, D.-N. Pagonis, D. Peirounakis & P. Mizithras		#088	Study on alignment of navigational information through transparent window	J. M. Lee, K. H. Lee, D. S. Kim, B. W. Nam & R. Li
	#151	Seakeeping characteristics of intact and damaged ship in the Adriatic sea	I. Martic, N. Degiuli & I. Catipovic		#069	Design of LNG storage and feeding system for an open type ferry	G. Theotokatos, G. A. Livanos, S. Dimitrellou, E. Strantzali, D.-N. Pagonis, K. Politis, A. Theodoulides, D. Peirounakis & P. Mizithras		#094	Failure analysis of container stacks by non-linear FE simulations under non-linear inertial loads	L. Moro, G. Bulian, E. Brocco, F. Bresciani, M. Biot & A. Francescutto
	#153	A linear three-dimensional frequency-domain numerical model for the prediction of ship motions in regular/irregular seaways	Y. Welaya, T.M. Ahmed & H.S. Abdel Wahab		#090	Influence of pre-defined non-dimensional ratios and affine mapping on ship properties	P. Georgiev & K. Kolev
	#177	Eco-shipping project for Japanese coastal vessels - verification project for CO2 emission reductions with ship-scheduling/voyage-planning system	T. Kano, T. Seta & K. Sato		#093	Design support system application to structural design of mega-yacht	V. Žanic, J. Andric, P. Prebeg, S. Kitarovic & K. Piric
13:00-14:30	Lunch
14:30-15:15	Invited Lecture (Zeljko Simic) (Room A)
15:15-15:30	Presentation of Journal Shipbuilding - Journal of the Croatian shipbuilding and supporting industry
15:30-17:15	Resistance and Propulsion (1) Chair: N. Degiuli				Ship Design (2) Chair: M. Altosole				Safety and Security (2) Chair: G. Bulian
	#030	Numerical investigation of the impact of speed reduction on propeller excitation	S. Gaggero, T. Gagero, D. Villa, E. Rizzuto & J. Hallander		#101	Dimensional line-up of river-sea navigation tankers	G.V. Egorov, I. A. Ilnytskyi & V.I. Tonyuk		#097	The importance of correct passage planning and weather prediction in lowering the ship’s carbon emissions	O. C. Acomi, N. Acomi & C. Stanca
	#099	A hybrid numerical method for calculating self-propulsion characteristics of ships	G.D. Tzabiras & S.P. Polyzos		#102	Parametrical line-up of Black sea cargo and cargo-passenger ferries	G.V. Egorov, I.A. Ilnytskyi & D.V. Chernikov		#169	The influence of damaged stability probabilistic approach on overall megayacht design	B. Ascic, M. Acanfora & D. Boote
	#120	Study and numerical simulation of the drag reduction on a flat plate lubricated by air injection obtained by microbubbles	I. Zotti & S. Miotto		#103	Main characteristics of "Dnieper -Max" class vessels	G.V. Egorov & A.G. Egorov		#185	Inspection capabilities for enhanced ship safety	I. Lazakis, G. Theotokatos, N. Barltrop & K. Dikis
	#132	Numerical hydrodynamic optimization of a tanker hull form	D. Legovic & R. Dejhalla		#091	Experimental assessment of comfort onboard planing hulls	E. Begovic, C. Bertorello, S. Pennino, V. Piscopo & A. Scamardella
	#144	Multi-objective optimisation of a semi-planing hull using CFD RANSE simulations with low number of cells	A. Agrusta, D. Bruzzone & I. Zotti		#160	Integration of a voyage model concept into a ship design optimization procedure	M. Ventura & C. Guedes Soares
17:15-18:15	Meeting of the Executive Committee of IMAM (Room B)
	Tuesday, September 22
	Room A				Room B				Room C
9:00-10:45	Resistance and Propulsion (2) Chair: I. Zotti				Marine Structures (1) Chair: J. M. Gordo				Shipyard Technology Chair: K. Ziha
	#007	Hydrodynamic performance of an autonomous underwater vehicle with a swivel tail	J. Bašic & B. Blagojevic		#009	Progressive collapse analysis of a bulk carrier using IACS prescribed and NLFEM derived load - end shortening curves	S. Kitarovic, J. Andric, K. Piric & M. Bicak		#176	Analysis of quality improvement models applied in shipbuilding projects	T. Bukša, D. Pavletic, M. Forempoher Škuver & J. Bukša
	#043	Numerical study of wave loads on a submerged cylinder at low KC numbers	G. Lupieri & G. Contento		#066	Evaluation of composite sandwich panel structural variants for fixed car decks in the car carrier superstructure	M. Stipcevic, S. Kitarovic, Ð. Dundara & V. Radolovic		#182	Friction and resistance coeficients by end launching	K. Žiha, T. Uroda, R. Fabris & M. Ivancevic
	#046	Powering and seakeeping forecasting for energy efficicency: assesment of the fuel savings potential for weather routing by in-service data and ensemble prediction techniques	A. Orlandi, F. Pasi, V. Capecchi, A. Coraddu & D. Villa		#002	Low cycle fatigue assessment of aging offshore wind turbine supporting structure subjected to abnormal wave loads	B. Yeter, Y. Garbatov & C. Guedes Soares	Renewable Energy
									#013	Design of a submerged disk wave energy converter	G. Gambacciani, R.C. Ertekin & C.M. Rizzo
	#056	Uncertainty analysis of resistance tests in Ata Nutku Ship Model Testing Laboratory of Istanbul Technical Faculty	C. Delen & S. Bal		#016	Modelling ice characteristics in iceberg-ship collision analyses	N. Ferrari, E. Rizzuti & A. Prestileo		#100	Strength analysis of the support structure of the offshore wind turbine	K. Niklas & J. Kozak
	#112	Influence of propeller characteristics on propeller structural design	C. Bertoglio, S. Gaggero, C.M. Rizzo, C. Vaccaro & M. Viviani		#071	Application of weight function method in the assessment of crack propagation through stiffened panel	I. Gledic & J. Parunov
10:45-11:15	Coffee Break
11:15-12:30	Seakeeping and Maneuvring (2) Chair: J. Prpic-Orsic				Marine Structures (2) Chair: J. Parunov				Marine Environment (1) Chair: P. Yannoulis
	#021	An automatic track control for an autonomous model for towing tank tests	F. Lopez Peña, A. Deibe, M. Míguez González , B. Priego Torres		#173	Ultimate strength of a corroded box girder subjected to pure bending and a non-propagating crack	S Saad-Eldeen, Y. Garbatov & C. Guedes Soares		#038	The impact of activities of the Port of Sillamäe, Gulf of Finland (Baltic Sea), on the adjacent fish communities in 2002-2014	L. Järv, R. Aps, T. Raid & A. Järvik
	#022	Using time domain nonlinear ship motion simulations to assess safety of people and cargo onboard a container vessel	G. Bulian, L. Moro, E. Brocco, F. Bresciani, M. Biot, A. Francescutto		#114	Ultimate strength of a box girder with a large opening subjected to flooding and flexural load	S Saad-Eldeen, Y. Garbatov & C. Guedes Soares		#070	Offshore wind catamaran powered by fuel cell propulsion system	R. Fernández-Corzo, T.J. Leo & M.A. Herreros
	#096	Integrated station-keeping and seakeeping predictions	F. Mauro & R. Nabergoj		#123	Degradation of longitudinal plate’s strength due to variation on the shape of initial imperfections	Jose Gordo, Guedes Soares		#126	Application of data assimilation for improving the predictions of storm conditions close to the West Iberian coast	L. Rusu & C. Guedes Soares
	#108	Investigation into the steering ability problems of compact hovercraft	A. Odetti & M. Mastrangeli		#124	Ultimate bending moment of a double span box girder with narrow stiffener’ spacing	Jose Gordo, Guedes Soares		#163	Analysis of performances of sustainable marinas and nautical ports	B. Dragovic, M. Škuric & V. Tselentis
					#198	On the fatigue crack initiation point of load-carrying fillet welded joints	Y. Dong, Guedes Soares
12:30-14:00	Lunch
14:00-20:30	Social Tour National park Brijuni
	Wednesday, September 23
	Room A				Room B				Room C
9:00-10:45	Invited Lectures (Sinisa Reljic, Dean Vucinic) (Room A)
10:45-11:15	Coffee Break
11:15-13:00	Ship Operation (1) Chair: T. A. Santos				Ship Structural Reliability Chair: E. Rizzuto				Seakeeping and Maneuvring (3) Chair: R. Nabergoj
	#023	Logistic hub for offshore support maintenance	P. Asgari & A.C. Fernandes		#048	Probabilistic limit state analysis of ship survival index	P. Georgiev & L. Naydenov		#026	Simulation of the maneuvering behavior of ships under the influence of environmental forces	D. Chroni, S. Liu, T. Plessas & A. Papanikolaou
	#059	Simulations performed to analyse a collision between two ships in order to enhance maritime safety	R. Tromiadis, A. Duse, R. Hanzu-Pazara & R. Dumitrache		#092	Influence of corrosion-related degradation of mechanical properties of shipbuilding steel on collapse strength of plates and stiffened panels	P. Jurišic & J. Parunov		#147	An optimized path following algorithm for a surface ship model	H. Xu & C. Guedes Soares
	#055	Optimization of spread mooring systems with Artificial Neural Networks	M. Yetkin & A. Mentes		#110	Structural reliability assessment of accidentally damaged oil tanker	B. Bužancic Primorac & J. Parunov		#061	Horizontal plane stability of a turret moored FPSO	C.G. Boisson Bastos & A.C. Fernandes
	#104	Feasibility project for shipping CNG from Cypruy to North Adriatic Arc	G. Trincas		#122	Risk assessment of LNG offshore floating units	K.F. Souza & O. Benyessaad
	#129	Solution of the nonlinear sum-frequency excitation problem of catenary pipelines using a frequency domain approach	I.K. Chatjigeorgiou		#180	Determination of safe maneuvering areas of towed sea barges carrying offshore wind farm elements in restricted waterways	L. Gucma, A. Bak & K. Lazuga
13:00-14:30	Lunch
14:30-16:15	Ship Operation (2) Chair: P. Georgiev				Marine Structures (3) Chair: Y. Garbatov				Legal Aspects Chair: D. Legovic
	#172	Analysis of the influence of meteorological conditions on maritime accidents in the Adriatic	R. Popovic, D. Medic & P. Komadina		#111	Strength assessment of a single hull damaged tanker ship subjected to asymmetrical flexural loading	M. Tekgoz, Y. Garbatov & C. Guedes Soares		#019	Conditions and risk preventions in the workplace of seafarers	A. Mª Asunción López-Arranz & C. López-Maiztegui
	#186	Optimal allocation of response resources model verification on the example of oil spill on the Pomeranian Bay	K. Lazuga, L. Gucma & M. Perkovic		#149	Prediction of wave transmission coefficient using neural networks and experimental measurements	V.K. Tsoukala, Th. Pyrpiri, M. Chondros & V. Katsardi		#037	Some considerations concerning work on offshore platforms	A. Mª Asunción López-Arranz & C. López-Maiztegui
	#082	Estimating the safety of STS transfer operations with fuzzy FTA	N.P. Ventikos & D.I. Stavrou		#189	Application of photogrammetry techniques for the visual assessment of vessels' cargo hold	E. Kolyvas, L. Drikos, E. Diamanti, A. El Saer & I. Lazakis		#141	Consequences of public policy in the perception of social and individual welfare of people working at the Spanish port system	I. Novo-Corti, F. González-Laxe & A. López-Arranz
	#140	Drilling platform schedule for different oil fields	Jose Vasconcellos & Lis Mara		#197	Estimation of effective notch strain for fatigue strength assessment of welded structures under multiaxial stress state	Y. Dong, Guedes Soares
					#195	Design charts for quick estimation of wave loads on damaged oil tanker in the Adriatic Sea	J. Parunov & M. Corak
16:15-16:45	Coffee Break
16:45-18:15	Fluid Flows Chair: F. Lopez Pena				Ship Machinery (1) Chair: C. R. P. Belkior				Maritime Transportation (1) Chair: R. C. Botter
	#051	Hydrodynamic analysis of hydrofoils in waves and currents	K. A. Belibassakis, E. S. Filippas, J. Touboul & V. Rey		#001	Modelling the effect of exhaust valve timing on exhaust thermal management of a diesel engine system	H.Ü. Basaran		#050	Integrating short sea shipping (RO-RO) in the inbound automotive supply chains	?. Burciu, F. Rusca, D. Costescu, R. Stoica & V. Drac?anu
	#113	Development of forces around a hydrofoil appendage of a sailing boat	K.N. Sfakianaki & G.D. Tzabiras		#159	Numerical simulation of two-stroke marine diesel engines	M. Tadros, M. Ventura & C. Guedes Soares		#064	Risk assessment for dangerous goods in maritime transport	F. Rusca, S. Raicu, E. Rosca, M. Rosca & S. Burciu
	#142	The increasing importance of accurate calculation of the nonlinear extreme wave kinematics in the design of offshore platforms.	K. Chatziioannou, V. Katsardi & E. Mistakidis		#178	Dynamic reliability analysis tool for ship machinery maintenance	K. Dikis, I. Lazakis & G. Theotokatos		#193	Economic assessment of LNG bunkering in the Portuguese coast	T.A. Santos & C. Guedes Soares
	#196	Ship hull form design and optimization based on CFD	A.A. Aksenov, A. V. Pechenyuk & Dean Vucinic		#187	An innovative machinery data management system for ships using a catalogue data model	A. Taheri, I. Lazakis & T. Koch		#194	Competition dynamics of ports in the Portuguese range	T.A. Santos, A.M.P. Santos & C. Guedes Soares
									#179	The new wave of port congestion and the impact of Ultra Large Container Vessels	M. Boile & S. Theofanis
18:15-20:00	General Assembly of the IMAM association (for delegates of the member institutions) (room B)
20:00-23:00	Social Dinner
	Thursday, September 24th
	Room A				Room B				Room C
9:00-10:45	Maritime Transportation (2) Chair: S. Burciu				Wave & Wind Modelling (1) Chair: G. Contento				Ship Machinery (2) Chair: M. Ventura
	#044	A preliminary approach for establishing a new toll calculation method for transiting the Suez Canal - container ships	M,M. Abdel Naby & H.W. Leheta		#017	Prediction of the extreme storms in the Black Sea with numerical wave models	E. Rusu & D. Butunoiu		#010	System control design of autopilot and speed pilot for a patrol vessel by using LMIs	A. Alessandri, S. Donnarumma, S. Vignolo, M. Figari, M Martelli, R. Chiti & L. Sebastiani
	#130	Short sea shipping in Brazil on a national project of green corridor	D.A. Moura & R.C. Botter		#008	Wave modelling with data assimilation in the Romanian nearshore	A. Raileanu, L. Rusu & E. Rusu		#054	Literature review of a LNG carrier machinery system	C.R.P. Belchior & C.H. Marques
	#003	On seaport development and reform and their institutional determinants: A new theoretical approach	K. Ibrahimi		#107	A high resolution wind & wave forecast model chain for the Mediterranean and Adriatic Sea	L. Donatini, G. Lupieri, G. Contento, L. Feudale, A. Pedroncini, L.A. Cusati & A. Crosta		#131	Diesel engine and propulsion diagnostics of a mini-cruise ship by using Artificial Neural Networks	R. Zaccone, M. Altosole, M. Figari & U. Campora
	#004	Seaport institutional and operational competition: A theoretical approach	K. Ibrahimi		#139	Sea state monitoring and simulation in the “Wind, Ports, and Sea” Project	G. Bonino, M. Burlando, P. De Gaetano, G. Solari, C. Carmisciano & L. Iafolla		#148	Numerical analysis of tank heating coil heat transfer process	I. Pivac & G. Magazinovic
10:45-11:15	Coffee Break
11:45-13:00	Marine Environment (2) / Fisheries Chair: E. Begovic				Wave & Wind Modelling (2) Chair: E. Rusu
	#020	Influence of the required EEDI reduction factor application on general cargo ships GHG emissions	I. Ancic, A. Šestan & N. Vladimir		#018	Spectral structure of breaking waves	S.Yu. Kuznetsov, Ya.V. Saprykina, B.V. Divinskii & M.N. Shtremel
	#134	Compliance with the EU sulphur directive - A status report on the European Sustainable Shipping Forum (ESSF) - R&I, Competitiveness, Financing	P. Yannoulis		#157	On ways of prediction of coastal zone wave transformation periodicity	M. N. Shtremel, Ya. V. Saprykina & S. Yu. Kuznetsov
	#042	Dynamics of the commercial fishery in the Baltic Sea: what are the driving forces?	T. Raid, T. Arula, O. Kaljuste, E. Sepp, L. Järv , A. Hallang, , H. Shpilev & A. Lankov		#116	The effect of wind loads on the attainable ship speed on seaways	R. Vettor, J. Prpic-Oršic & C. Guedes Soares
					#145	Wind loads estimation method based on elliptic Fourier descriptors	M. Valcic & J. Prpic-Oršic
13:00-14:30	Closure of the Congress (Plenary Session , Room A)